Altech pre-feasibility study progress site for R&D activities secured

Photo: Altech

Altech Chemicals Limited has provided an update on the progress of the pre-feasibility study (PFS) for construction of a battery materials high purity alumina coating plant in Saxony, Germany. The PFS is being carried out by Altech’s 75% owned German subsidiary, Altech Industries Germany GmbH (AIG).

PFS work is progressing rapidly and as planned. The following activities have now been completed:

• A due diligence review of the existing environmental and site conditions at the proposed Schwarze Pumpe site by a local environmental consultant. The review confirmed the suitability of the site for plant development with no issues identified. The German consultant outlined the requirements for plant permitting, and the applicable environmental regulations which the plant will be designed to meet. All requirements are as expected and as such are not anticipated to present any difficulties to satisfy during plant design.

• Potential suppliers for utilities and raw materials have been identified and input pricing for these and other key plant operating costs have been obtained.

• An assessment of the local labour market and the related employee remuneration and on-costs has been completed.

• Electrical infrastructure, piping materials and potential construction services suppliers have been shortlisted and commissioned to provide proposals. In addition, discussions have commenced with numerous potential process equipment suppliers to determine pricing and supply lead times.

The battery material coating process consists of four stages. Stage 1 is a HPA precursor production step using an alternative aluminium feedstock. For the PFS it will be assumed that the HPA precursor would ultimately be supplied from Altech’s HPA plant in Johor, Malaysia once operational. The option for an alternate initial precursor supply would allow the coating plant to have a development timeframe that is independent of Johor.

Stage 2 of the process is the receival of the anode battery material (graphite or silicon) in bulk bags or drums. The next step is the HPA nano layer coating process which will take place in the coating section of the plant – this is the proprietary technology that Altech has developed. The last stage in the process is finalisation of the coated material, which is then packaged in either bulk bags or drums for shipment to end users.

The lay-out of the proposed coating plant at the proposed site, the Schwarze Pumpe Industrial Park in Saxony, Germany will be such that it would allow for the construction of additional materials coating capacity in the future, such as a silicon coating plant and/or additional graphite coating capacity.